Wavetek 147 Spécifications télécharger pdf (Page 299)

100

101

SDA-5500/SDA-5510 Sweep Configuration: Forward Sweep Configuration (SDA-5500)

275

The soft key next to the chevron icon in the upper left takes

you back to the main CHANNEL PLAN menu.

3. From the CHANNEL PLAN menu, highlight Select Channel Plan, and

press the Enter key.

4. Press the designated soft key, then choose NCTA plan. At this point

ignore the File Icon and the Information Icon, and return to the

CHANNEL PLAN menu.

NOTE: If this is the first time you’ve used the unit, the

standard NCTA plan will be the only one available. In that

case, perform the steps in "First Channel Plan Procedure"

and "Editing a Channel Plan" that follow this list.

5. Select Video Signal Type, and choose NTSC

6. Select Channel Tuning Sequence, and choose FREQUENCY Order

Tuning

7. Select Build Channel Plan, press the icon to build a new plan.

8. Step 1 Press OK for Default Name

9. Step 2 Press OK (even if your are overwriting another plan)

10. Step 3 (Stop Frequency) Use the keypad to enter 1000.00 MHz, then

press Enter and the OK soft key.

First Channel Plan Procedure

1. Call up the CONFIGURE menu from the Navigator and select the

CHANNEL PLAN option.

2. Press the Channel Plan soft key and select Build Channel Plan from

the list (see Figure 14-5).

1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 409 410

Commentaires sur ces manuels

Pas de commentaire

Wavetek 147 Spécifications Page 299

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Wavetek 147