Wavetek 39A Spécifications télécharger pdf (Page 115)

User Manual 301/302

TRACe #<header><binary_block>

Purpose

This command will download waveform data to the 302 memory. The Loading Arbitrary Waveforms section

of this manual descries how to use this command in greater details.

TRACe:DEFine <segment_number>,<length>

Purpose

This command will define waveform segments and their relative length. Waveform data can be loaded into

segments only after using this command.

• <segment_number> numeric value will set the selected segment

• <length> numeric value will assign length to the above selected segment

TRACe:DELete <segment_number>

Purpose

This command will delete a segment.

• <segment_number> numeric value will select the segment number that will be deleted

TRACe:DELete:ALL

Purpose

This command will delete all segments and will clear the entire waveform memory.

TRACe:SELect <segment_number>

Purpose

This command will select the active waveform segment for the output.

• <segment_number> numeric value will set the active waveform segment number

TRACe:SELect?

Response

The 302 will return the active segment number.

SEQuence:MODE SSEQuence | MSEQuence

Purpose

This command will select the sequence mode.

• <SSEQuence> will select the single sequence mode

• <MSEQuence> will select the multi sequence mode

SEQuence:MODE?

Response

The 302 will return the SSEQ, or MSEQ depending on the present sequence mode setting.

SSEQuence:ADVance AUTOmatic | STEP | SINGle

Purpose

This command will select the single-sequence advance mode.

SCPI Command Reference

104

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 136 137

Pas de commentaire

Wavetek 39A Spécifications Page 115