RESISTANCE MEASUREMENT (See Fig. 4)
❶ Turn off any power to the resistance to be measured and discharge any capacitors. Any voltage present
during a resistance measurement will cause inaccurate readings.❷ Connect test leads to the meter as shown in
figure 4. ❸ Set Function/Range Switch to the desired resistance range. ❹ Connect test leads to circuit being
measured. ➎ Read resistance value on Digital Display. Open circuits will be displayed as “1”.
D • Widerstandsmessung (siehe Fig. 4)
❶
Jede Spannung vom Widerstand abschalten und Kondensatoren entladen. Eine am Widerstand anliegende
Spannung würde das Resultat verfälschen.
❷
Rotes Meßkabel mit V•Ω Eingang und schwarzes mit COM
verbinden.
❸
Funktionsschalter auf Ω-Position stellen.
❹
Meßspitzen mit Widerstand/ Schaltkreis
verbinden.
➎
Meßwert ablesen. Ein offener Schaltkreis wird mit Überlast “1” angezeigt.
E • Medidas de Resistencia (vea Fig.4)
❶
Asegúrese de que no hay tensión aplicada a la resistencia y descargue los condensadores. La presencia
de tensión causará imprecisión en las medidas de resistencia.
❷
Conecte la punta de prueba roja a la
- 16 -
Commentaires sur ces manuels