Wavetek MS1300 Spécifications télécharger pdf (Page 38)

Use the left and right arrows to tune your microStealth. The

frequency increments or decrements by the step size that you have

specified in the Measurement configuration (see FREQUENCY

TUNING STEP SIZE). You can also use the numeric entry keys to

tune directly to the frequency desired.

MEASUREMENT HOLD

You can freeze the level measurement at any time by pressing the

SHIFT + keys. The measurement is retained even if the cable

is disconnected from the input port. Notice that the mode icon in

the upper left-hand portion of the screen flashes when the measure-

ment is on hold. Press the SHIFT + keys again to release the

hold. The hold is also released when you tune to a different

channel or frequency. The measurement is not retained when

another mode is selected or the microStealth is shut off.

PRINTING THE SCREEN

You can print the entire screen at any time by pressing the SHIFT

+ keys. A bar graph appears indicating the status of the printout.

Tip

If you are using your microStealth at a location where it is not

convenient to connect to a printer (such as on a pole), you can put

the measurement on hold until you are able to access the printer.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 70 71

Pas de commentaire

Wavetek MS1300 Spécifications Page 38