Wavetek MS1300 Spécifications télécharger pdf (Page 18)

Tip

You can tell when the backlight is on even in bright sunlight by

looking for the backlight indicator at the left-hand edge of the Title

Bar. The indicator means that the backlight is currently on and

will turn off automatically. The indicator means that the back-

light is on and will remain on continuously. If you see no indicator,

the backlight is off.

TIME

Sets the time for the internal real-time clock. The time is set,

displayed and printed in 24 hour format only (HH:MM:SS).

DATE FORMAT

You can specify the format in which the date is displayed and

printed. Select between the following formats:

MM/DD/YY

DD.MM.YY

YY.MM.DD

DATE

Sets the date for the internal real-time clock. You can specify the

format in which the date is set, displayed and printed (see DATE

FORMAT).

PRINTER

Select the manufacturer of the printer that you will be using. A

printer with a serial interface is required. Set your printer configu-

ration as follows:

Baud Rate: same as your microStealth

Date Bits: 8

Stop Bits: 1

Parity: NONE

Flow Control: Xon/Xoff

Important

The baud rate of both your microStealth and your printer must

match (see BAUD RATE).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 70 71

Pas de commentaire

Wavetek MS1300 Spécifications Page 18