Wavetek 3ST Spécifications télécharger pdf (Page 88)

5-5

The problem is that the two systems use the same spectrum,

making it impossible to distinguish between the two with one

instrument.

The recommended method for these systems is to first sweep the

forward portion of the network, then move the transmitter out to the

furthest extremity and sweep the reverse portion.

5.2 HOW TO SETUP FOR REVERSE SWEEPING

To setup the Reverse Sweep on the 3ST, press the SETUP key and

select the “Sweep Transmitter” option from the Setup menu. The

Sweep Receiver setup screen will appear.

5.2.1 Enable or Disable Reverse Sweep

When Reverse Sweep is enabled, both Forward and Reverse sweep-

ing can be performed. Only Forward sweeping is possible when

Reverse Sweep is disabled.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 101 102

Pas de commentaire

Wavetek 3ST Spécifications Page 88