Wavetek 3SR Spécifications télécharger pdf (Page 41)

4-18

The Edit Limits function works in conjunction with the performance

of an Auto Test. As the Auto Test measurements are made, the

values are compared to the above limits. Use the Up and Down arrow

soft keys to select the limit to be edited. Use the numeric entry keys

or the UP and DOWN arrow keys to enter a value. Once the value

has been entered, press the ENTER key to update the display. The

Set for FCC soft key can be used to automatically set the limits for

FCC specified values.

Copy Remote Plan

This selection allows you to copy a channel plan from one unit to

another.

Connect a cable between the serial ports of two units. Ensure that

the baud rate is set the same for each unit (General Setup screen). A

baud rate of 19.2K is recommended for copying plans.

Select Copy Remote Plan from the menu and press the ENTER key.

A list of plans located in the remote units memory will appear. Select

the plan that you want to copy and press the Copy soft key. The

selected plan will be transferred from the remote unit and stored in

the unit that you are operating. It will also become the active plan.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 124 125

Pas de commentaire

Wavetek 3SR Spécifications Page 41