Wavetek MS1000 Manuel d'utilisateur Page 32

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 31
Messtechnik Elektrische Messtechnik Seite 32 von 60
Piezotranslator HVPZT 40µm
Hersteller: Physik Instrumente (PI) GmbH & Co. KG
Open loop travel@ 0 to -1000 V 40µm ± 20%, Closed loop
travel 40 µm, Integrated feedback sensor SGS , Closed /
open loop resolution 0.8/0.4nm, Stiffness 220 N/µm ± 20%,
Force generation (blocked) 8800 N ± 20%, Push/pull force
capacity 4500 / 500 N, Torque limit (at tip) 1000 mNm, Max.
operating voltage -1000 V, Electrical capacitance 460 nF ±
20%, Dynamic operating current coefficient (DOCC) 17.5
µA/(Hz x µm), Unloaded resonant frequency (f0) 6.5 kHz ±
20%, Standard operating temperature range -40 to +80°C,
Voltage connection VH , Sensor connection L , Weight with-
out cables 148 g ± 5%, Material case / end pieces N-S ,
Length L 66.5 mm ± 0.5, Closed loop models with the P-
177.10 option and with calibration data sheets , Option ball
tip, Option UHV: The piezo ceramics are enclosed in a
stainless steel case with vent holes. The PZTs can be baked
to 150 °C. The electrical connection is via two 50 cm Teflon
leads
Zubehör: 1 St. Sensor Verlängerungskabel, 3m P-892.03
1 St. Verlängerungskabel für HVPZTs, LEMO-LEMO 3m P-
209.03
Dokumentation: PZ Performance Test Document vom 13.12.2001
Datenblatt unter: http://www.apz-ilmenau.de/index.php?id=3343
Inventarnummer: MT-00186
Piezotranslator HVPZT 120µm
Hersteller: Physik Instrumente (PI) GmbH & Co. KG
Open loop travel @ 0 to –1000 V 120 µm ± 20%, Closed
loop travel 120µm, Integrated feedback sensor SGS, Closed
/ open loop resolution 2.4 / 1.2nm, Stiffness 32N/µm ±20%,
Force generation (blocked) 3800N ± 20%, Push/pull force
capacity 2000 / 300N, Torque limit (at tip) 500mNm, Max.
operating voltage 1000V, Electrical capacitance 500nF ±
20%, Dynamic operating current coefficient (DOCC) 6µA/(Hz
x µm), Unloaded resonant frequency (f0) 5kHz ± 20%,
Standard operating temperature range 40 to +80°C, Voltage
connection VH, Sensor connection L, Weight without cables
136 g ± 5 %, Material case / end pieces N-S, Length L 127
mm ± 0.5, Closed loop models with the P-177.10 option and
with calibration data sheets , Option ball tip, Option UHV:
The piezo ceramics are enclosed in a stainless steel case
with vent holes. The PZTs can be baked to 150 °C. The elec-
trical connection is via two 50 cm Teflon leads
Zubehör: Sensor Verlängerungskabel, 3m P-892.03
Verlängerungskabel für HVPZTs, LEMO-LEMO 3m
P-209.03
Dokumentation: PZ Performance Test Document vom 18.12.2001
Datenblatt unter: http://www.apz-ilmenau.de/index.php?id=3343
Inventarnummer: MT-00187
Vue de la page 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Commentaires sur ces manuels

Pas de commentaire