Wavetek MS1300 Spécifications télécharger pdf (Page 28)

Tip

Notice that the selected channel number is displayed in the upper

right-hand corner of the parameter list. When the list is active, you

can use the left or right arrows to select the previous or next chan-

nel in the plan. You can also use the numeric keys to directly enter

a specific channel number.

SELECT TILT CHANNELS

Press the key to specify which carriers to measure on the

TILT screen. A list of all enabled channels in the current plan

appears.

Up to six channels can be selected. To select a channel, use the up

or down arrow to highlight the desired channel in the list, then press

the soft key. A check mark appears in the left-hand column of

the list indicating that this is now a TILT channel. Also, the

channel number appears in one of the six boxes above the list.

Press the a second time to deselect the TILT channel.

Note

The TILT channel numbers are displayed above the list in order of

increasing frequency — not in the order in which they were se-

lected.

When you have finished, press the soft key.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 70 71

Pas de commentaire

Wavetek MS1300 Spécifications Page 28